ACU-RITE DRO 200M - Manual (Page 17)

Readout Operations DRO 200M
10
1.625
X 0.000 ABS
X
2 5
ENTER
6 . 1
The drill is positioned at
0.000 ABS.
Preset the absolute location of the hole.
Absolute
zero.
X -1.625 INCR
ABS
INCR
X 0.000 ABS
1.625
-1.625
Now the drill is 1.625
on the negative side
of the hole.
Incremental zero: the
incremental display
will read 0.000 when
the drill is positioned
over the hole.
Presetting
When you preset a dimension, the readout places an incremental zero at the
location you specify. Then the display automatically switches to the incremental
display so that you can move to zero.
Begin a preset by pressing an axis key ( X for example). The information of the
previous preset will appear. The display will show you if the preset is absolute or
incremental. Use the
ABS
INCR
key to toggle between them.