Garmin GPS II Plus - Manual (Page 42)

Fig. 36a
Fig. 36b
36
Reference
Waypoint Symbols
The GPS II + allows you to select one of 16 symbols for each waypoint for easy
recognition on the map display. From the symbol page, you may also select how the
waypoint appears on the map.
To select a waypoint symbol:
1. Highlight the symbol field (Fig. 36a), and press ENTER.
2. Use the arrow keypad to select the desired symbol, and press ENTER.
3. The cursor will move to the display field, where you can select which waypoint infor-
mation is displayed on the map.
4. Press ENTER, and select one of the following display options: ‘name with symbol,’ ‘sym-
bol only,’ or ‘comment with symbol’ (Fig. 36b).
5. Press ENTER to confirm your selection, and ENTER again to confirm the ‘done’ prompt.
gps ii + 8/4/98 3:28 PM Page 36