Garmin GPS II Plus - Manual (Page 56)

Fig. 50a
Fig. 50b
50
Reference
Active Route Page
Once a route has been activated, the active route page will display the waypoint
sequence of your route with the estimated time enroute (ETE) at your present speed
and the distance to each waypoint (Fig. 50a). As long as you are navigating an active
route, the active route page will become part of the main page sequence of the unit.
The active route page will also allow you to change the ‘ete’ field to display desired
track (DTK) or estimated time of arrival (ETA) for each leg. You can also clear or
invert the active route.
To display DTK or ETA for each leg:
1. Highlight ‘ETE’, and press ENTER (Fig. 50b).
2. Select ‘DTK’ or ‘ETA’, and press ENTER.
The active route page also allows you to clear (stop navigating) or invert the
active route without using the route definition page.
To invert a route from the active route page:
1. Highlight ‘INV?’, and press ENTER.
To clear the active route and stop route navigation:
1. Select ‘CLR?’, and press ENTER.
gps ii + 8/4/98 3:29 PM Page 50