Garmin GPS II Plus - Manual (Page 45)

The waypoint scanning feature
will offer the first waypoint
that matches the character or
characters you have entered to
that point. If you have more
than one waypoint that begins
with the same letter or num-
ber, move to the next character
position as needed.
39
Reference
Scanning Waypoints
As you manually enter a waypoint’s name, the GPS II + ’s waypoint scanning fea-
ture will automatically display the first numerical or alphabetical match of the char-
acter you have entered to that point. This helps eliminate the need to always enter a
waypoint’s complete name.
To scan waypoints from a waypoint field:
1. Highlight the waypoint name field, and press ENTER.
2. Press the left side of the keypad to clear the name field.
3. Scroll through the waypoints.
Note: The GPS II + ’s waypoint scanning feature will offer the first waypoint that
matches the character or characters you have entered up to that point. If you have
more than one waypoint that begins with the same letter or number, move to the
next character position as needed.
4. When you find the desired waypoint, press ENTER.
gps ii + 8/4/98 3:28 PM Page 39