Garmin GPSMAP 196 - Manual (Page 109)

Installation Information
This section of the Appendix provides information on connecting the
GPSMAP 196 to auxiliary devices and removing the antenna.
Connecting the Power/Data Cable
The power/data cable connects the GPSMAP 196 to an 8–35 VDC
system and provides interface capabilities for connecting external
devices. The color code in the diagram below and to the right
indicates the appropriate harness connections. Replacement fuse is a
3AG - 2.0 Amp fuse.
Unit View
Data In
White
Power
Red
Ground
Black
Data Out
Brown
Cable View
Data In
White
Power
Red
Data Out
Brown
Ground
Black
8-35
Brown: Data Out
White: Data In
Black: Ground
Red: Power
volts DC
Autopilot/
NMEA Device
GBR 21/23
Beacon
Receiver
GPSMAP 196 Pilot’s Guide 101
A
PPENDIX
> I
NSTALLATION
I
NFORMATION