Garmin GPSMAP 196 - Manual (Page 57)

Navigating in Land Mode
Land Mode and Water Mode are similar. Most of the features
discussed here also apply to Water Mode.
There are several ways to begin navigating to a point in Land Mode:
• Select a point on the map and press the Direct To .
• Press NRST/FIND to search for a particular item and create a
route to it.
You can also start a saved route through the Routes tab of the Main
Menu. For more information, refer to page 52 .
To goto a highlighted map item:
1. Use the ROCKER to highlight the item you would like to
navigate to on the Map Page.
2. Press Direct To . Go To <point name> is added to the
list of options and automatically highlighted. If you have
selected an area of the map that is not a map feature,
Go To MAP Point is listed. Select Go To <point name> or
Go To MAP Point, and press ENTER.
Navigate Options in Land Mode
3. Follow the route line created on the Map Page or the turn-by-
turn route (auto-route) by using the Current Route Page.
GPSMAP 196 Pilot’s Guide 49
B
ASIC
O
PERATION IN
L
AND
M
ODE
> N
AVIGATING IN
L
AND
M
ODE