Garmin GPSMAP 196 User Manual

Page 119

Advertising
background image

No DGPS Position—no differential connection data is available, or not enough

data is available to calculate a DGPS position.
No Tide Stations for that Area—no tide stations within 100 miles of the area.
None Found—no data matched the search criteria.
Off Course—you are off course by the distance set in the Off Course Alarm.
Proximity Memory Full—no additional proximity waypoints can be saved.
Proximity Radius Overlaps—the radius of two proximity waypoints overlap.
Route Already Exists—you have entered a route name that already exists.
Route Calculation Error—no route can be calculated.
Route Memory Full—no additional routes can be saved.
Route Truncated—uploaded route from another device has more than 50

waypoints.
Route Waypoint Memory Full—no additional route waypoints can be saved.
Steep Turn—approaching a turn that requires a bank angle in excess of 25

degrees to stay on course.

Sunrise, Switching to Day Mode—the unit is switching to Day Mode.
Sunset, Switching to Night Mode—the unit is switching to Night Mode
Track Already Exists—a saved track with the same name already exists.
Track Log Full—the track log is full and track recording was turned off.

To record more track points, you need to clear the track log and turn track

recording on.
Track Memory Full—no more track data can be stored. Delete the old track

data to store the new data.
Track Truncated—a complete uploaded track will not fit in memory. The

oldest track log points have been deleted.
User Timer Expired—the Timer Alarm value has counted down to zero.
VNAV Cancelled—VNAV function cancelled due to a change in the active

route.
Waypoint Already Exists—a waypoint with the same name already exists.
Waypoint Memory Full—the unit has stored the maximum number of

waypoints.

GPSMAP 196 Pilot’s Guide

111

A

PPENDIX

>

M

ESSAGES

Advertising