Garmin GPSMAP 76S - Manual (Page 35)

33
Getting Started
Reference
ENTER. Using the ROCKER, select a symbol from the list and press
ENTER. The selected symbol will be displayed at the waypoint location on
the Map Page.
Changing the Name — Place the highlight over the name field and press
ENTER. Using the ROCKER (up/down) scroll through the alpha-numeric
list and make a selection. To move the next placeholder press the ROCKER
to the right. When finished, press ENTER to accept the changes.
Changing the Location, Elevation or Depth — Place the highlight on the
desired field and press ENTER. Using the ROCKER, scroll through the
numeric list until the desired number is displayed. Press the ROCKER to the
right to move to the next character. When finished, press ENTER to accept
the changes.
Show Name on Maps — When ‘Show Name on Maps’ is checked, the
waypoint name will be displayed on the Map Page. To check/uncheck the
box, place the highlight over that box and press ENTER.
New, Mark and Waypoint Page Options
When the New, Mark or Waypoint Page is displayed pressing the MENU
key will display an options menu. This menu contains four options, ‘Average
Location’, ‘Project Location’, ‘Sight ‘N Store’, and ‘Append to Route’.
Average Location — When this option is selected, the Average Location Page
will be displayed and the unit will begin to take and average location read-
New, Mark, and Waypoint Page Options
Editing Waypoints
Waypoint Pages Options