Garmin GPSMAP 76S - Manual (Page 64)

62
Approaching Turn — is displayed when you are nearing a turn in a route.
Arriving at Destination — is displayed when you are nearing your destination.
Batteries Low — when displayed you have less than 10 minutes of battery left.
Can’t Unlock Maps — No applicable unlock code for one or more maps was
found. All MapSource map are not accessable.
Cannot display all found, use city or postal code — The unit found too many
items to display. Narrow the search using the city or postal code.
Database Error — Internal problem with the unit. Contact your dealer or
GARMIN Customer Service to have the unit repaired.
Deep Water — The water is deeper than the amount set in the Deep Water Alarm.
Dragging Anchor — is the message displayed when the distance set in the Anchor
Alarm is exceeded.
Lost Satellite Reception — The unit is unable to continue receiving satellite
signals.
Memory Full — Unit memory is full, no further data can be saved.
Near Proximity Point — You have reached the distance set for a proximity
waypoint.
No Diff GPS Location — RTCM is selected but no DGPS data is being received.
No Tide Stations for that Area — No tide stations within 100 miles of the area.
None Found — No data matched the search criteria.
Off Course — You are off course the distance set in the ‘Off Course’ Alarm.
Proximity Memory Full — No additional proximity waypoints can be saved.
Proximity Radius Overlaps — The radius of two proximity waypoints overlap.
Route Already Exists — You have entered a route name that already exists.
Appendix F
Messages