Garmin StreetPilot c510 - Manual (Page 10)

 c510 Owner’s Manual
G
ettinG
S
tarted
Step 1: Mounting the c510
Select a suitable location to mount the c510 on your windshield. Clean and dry the
selected area of your windshield.
➌
➊
➋
Wndsheld
1. Plug the power cable into the power connector on the back of the c510.
2. Place the suction cup on the windshield. Flip the lever back, toward the windshield.
3. Snap the socket on the back of the c510 onto the ball on the end of the suction cup
mount.
4. Plug the power cable into a power receptacle in your vehicle. Your unit should turn
on automatically if it is plugged in and your vehicle is running.
5. If your power cable has an antenna with suction cups attached, use the suction
cups to route the antenna vertically on the windshield.
To remove the c510 from the mount, turn the c510 as far as you can to the right or left.
Apply pressure in that direction until the c510 snaps off the mount.
To remove the suction cup mount from the windshield, flip the lever toward you. Pull
the tab on the suction cup toward you.