Garmin StreetPilot c510 - Manual (Page 33)

c510 Owner’s Manual 5
a
PPendix
For more information about GPS, visit
www.garmin.com/aboutGPS .
Changing the Fuse
Caution: When replacing the
fuse, do not lose any of the small
pieces and make sure they are put
back in the proper place.
1. Unscrew the black
(or silver), round end
piece and remove it.
2. Remove the fuse
(glass and silver
cylinder) and replace
with a 1A, 3AG,
standard blow fuse.
3. Ensure that the silver
tip is placed in the
black end piece. Screw
on the black end piece.
Updating the pdating the Software
1. Go to www.garmin.com/products/
webupdater to download the
WebUpdater program to your
computer.
2. Connect the c510 to your computer
using the mini-USB cable.
3. Run WebUpdater, and follow the
screen prompts. After confirming
that you want to perform an update,
WebUpdater automatically downloads
the update and installs it on your
c510.
4. Eject and unplug your c510 (see
page 36).
Additional Maps
You can purchase additional MapSource
map data from Garmin and load the
maps on your c510’s internal memory
or on an optional SD card. Also, check
www.garmin.com/unlock/update.jsp to
see if an update for your map software is
available.
To find out the version of the maps that
are loaded on your c510, open the Menu
page. Touch > Map > Map
info . To enable additional maps, you
need your unit ID (see page 19 ) and
serial number (located near the power
connector).
Unscrew Unscrew
end
pece
slver tp
fuse
end
pece
slver tp
fuse