Garmin GPSMAP 7215 - Manual (Page 62)

56 GPSMAP ® 6000/7000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Configuring the VGA Display
Before you can configure the VGA display mode on a GPSMAP 7015 or 7215 chartplotter, you must set the
video Source setting to VGA Input ( page 55 ).
1. From the Home screen, select Information > Video .
2. Touch anywhere on the screen.
An on-screen display appears.
3. Complete an action:
• Touch the brightness arrows to adjust the screen brightness.
• Touch the contrast arrows to adjust the screen contrast.
Exiting the VGA Display
1. From the Home screen, select Information > Video .
2. Touch anywhere on the screen.
An on-screen display appears.
3. Touch the display mode icon in the upper-left corner.
The video menu appears.
4. Select Source .
5. Select a new value for the video Source setting ( page 55 ).