Garmin GPSMAP 7215 User Manual
Page 86
80
GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
VRM and EBL
The variable range marker (VRM) and the electronic bearing line (EBL) measure the distance and bearing
from your boat to a target object. On the Radar screen, the VRM appears as a circle that is centered on the
present location of your boat, and the EBL appears as a line that begins at the present location of your boat and
intersects the VRM. The point of intersection is the target of the VRM and the EBL.
Showing the VRM and the EBL
The VRM and the EBL configured for one mode are applied to all other radar modes.
1. From the Home screen, select
Radar
.
2. Select
Cruising
,
Harbor
,
offshore
, or
Dual Range
.
3. Complete an action:
• Select
Menu
>
Show VRM/eBL
for Cruising, Harbor, or Offshore mode.
• Configure the setting for the short-range screen in Dual Range mode. Select
>
Menu
>
Show
VRM/eBL
for the GPSMAP 6000 series. Select
Left
>
Show VRM/eBL
for the GPSMAP 7000
series.
• Configure the setting for the long-range screen in Dual Range mode. Select
>
Menu
>
Show
VRM/eBL
for the GPSMAP 6000 series. Select
Right
>
Show VRM/eBL
for the GPSMAP 7000
series.
Adjusting the VRM and the EBL
You must show the VRM and the EBL before you can adjust them (
).
You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the
VRM and the EBL. The VRM and the EBL configured for one mode are applied to all other radar modes.
1. From the Home screen, select
Radar
.
2. Select
Cruising
,
Harbor
,
offshore
, or
Dual Range
.
3. Complete an action:
• Select
Menu
>
Adjust VRM/eBL
>
Move VRM/eBL
for Cruising, Harbor, or Offshore Mode.
• Configure the setting for the short-range screen in Dual Range mode. Select
>
Menu
>
Adjust
VRM/eBL
>
Move VRM/eBL
for the GPSMAP 6000 series. Select
Left
>
Adjust VRM/eBL
>
Move VRM/eBL
for the GPSMAP 7000 series.
• Configure the setting for the long-range screen in Dual Range mode. Select
>
Menu
>
Adjust
VRM/eBL
>
Move VRM/eBL
for the GPSMAP 6000 series. Select
Right
>
Adjust VRM/eBL
>
Move VRM/eBL
for the GPSMAP 7000 series.
4. Select a new location for the intersection point of the VRM and the EBL:
• For the GPSMAP 6000 series, use the Rocker to select a new location.
• For the GPSMAP 7000 series, touch a new location.
5. Select
Done
.