Garmin GPSMAP 7215 - Manual (Page 69)

GPSMAP ® 6000/7000 Series Owner’s Manual 63
Device Configuration
Data bars
Perspective 3D with Data Bars
Showing the Cruising Data Bar
The cruising data bar appears while you are navigating to a destination. It shows GPS speed, GPS heading,
depth, and GPS position data.
1. From the Home screen, select
Charts .
2. Select a chart or a 3D chart view.
3. Select
Menu > Data Bars > Cruising > on .
Configuring the Cruising Data Bar
You should show the cruising data bar before you configure it ( page 63 ).
The cruising data bar is divided into four sections, and each section appears in a different corner of the chart.
You can select the type of data that appears in each section of the data bar.
1. From the Home screen, select
Charts .
2. Select a chart or a 3D chart view.
3. Select
Menu > Data Bars > Cruising > Data Bar Setup .
4. Select top Left .
5. Select the type of data to appear in the top left section of the data bar.
6. Repeat steps 4 and 5 for the top Right, Bottom Left, and Bottom Right sections of the data bar.
Showing the Navigation Data Bar
The navigation data bar appears in a row across the top of the chart. The navigation data bar can show distance
to destination, arrival, off-course, bearing, and next turn data.
1. From the Home screen, select
Charts .
2. Select a chart or a 3D chart view.
3. Select
Menu > Data Bars > Navigation .
4. Select on or Auto .