Garmin StreetPilot 2820 - Manual (Page 27)

StreetPilot 2820 Owner’s Manual 
c
reatinG and
e
ditinG
r
oUtes
Saving the Active Route
From the Menu page, touch Tools > my Data > routes >
Save active route .
Navigating a Saved Route
From the Menu page, touch Tools > my Data > routes >
navigate Saved route . Touch the route you want to navigate.
Recalculating the Route
From the Menu page, touch Tools > my Data > routes >
recalculate route .
Deleting All Saved Routes
From the Menu page, touch Tools > my Data > routes >
> Delete all Saved routes .
Stopping Your Route
From the Menu page, touch Stop and then touch yes .
Adding a Detour to a Route
If you need to take a detour from your current route, open the
Menu page and touch Detour .
1/2 mile, 2 miles, or 5 miles —select the distance of the detour.
For example if a road sign indicates that the street is closed for the
next three miles, touch 5 miles in the list. Your StreetPilot 2820
recalculates your route for the next five miles.
Detour by road(s) In route —select roads in your route to avoid.
For example, if the highway ramp is closed, select the ramp in the
list of roads. Your StreetPilot 2820 recalculates your route to avoid
that ramp.
Detour by Traffic Event on Route —if you are using an FM
Traffic Receiver, you can detour around traffic events (incidents).
remove all Detours —touch to remove any detours you have
entered for the route.