Garmin StreetPilot 2820 - Manual (Page 33)

StreetPilot 2820 Owner’s Manual 2
L
oadinG
f
iLes on
y
oUr
2820
Updating Software and Map Data
1. Load the USB drivers using the enclosed DVD-ROM. See
page 22 .
2. Connect the AC cable to the power connector on the back
of the StreetPilot 2820. Turn on the StreetPilot 2820
3. Connect the USB cable to your StreetPilot 2820 and your
computer.
4. Go to www.garmin.com/products/sp2820 . Select Updates
and Downloads .
5. Click Download next to the unit software.
6. Read and agree to the terms. Click Download .
7. Select Run (or Open ). Your software is updated.
You can also use WebUpdater to update your StreetPilot 2820
software. Go to www.garmin.com/products/webupdater/ to learn
about WebUpdater.
Check
www.garmin.com/unlock/update.jsp to see if an update for
your map software is available.
To find out the version of the maps that are loaded on your 2820,
open the Menu page. Touch Settings > about > Detail maps . To
load maps to your 2820, see the MapSource Help file.
Using xImage to Customize Your Splash
Screen
xImage allows you to exchange images between your computer
and your StreetPilot. Use xImage to download your current splash
screen, then customize or replace it, and send it back to your
StreetPilot. You can download xImage from the Garmin Web site
at www.garmin.com/ximage/. Refer to the Help file for complete
instructions about using xImage.