Garmin GNC 250 - Manual (Page 11)

TO SELECT A DIRECT - TO DESTINATION :
❏ Press the D
key.
❏ Enter the identifier of the destination waypoint.
❏ Press E to accept the identifier, and E again to accept
the direct-to confirmation page.
TO RE - CENTER THE D - BAR :
❏ Press D , followed by E twice.
TO SELECT A DIRECT - TO FROM ANY PAGE THAT DISPLAYS A SINGLE
WAYPOINT IDENTIFIER :
❏ Press D , followed by E .
TO CANCEL A DIRECT - TO :
❏ Press the D key.
❏ Press the \ key, followed by E .
DIRECT
-TO
250 Quick Ref 7/14/98 9:14 AM Page 11