Garmin GNC 250 - Manual (Page 13)

The GNC 250’s waypoint sequencing field allows you to ‘hold’ on a
selected waypoint and prevent the GPS from sequencing to the next
route waypoint. You may also use the hold mode with the course
select feature to maintain a user-defined course to the hold waypoint.
TO HOLD ON A WAYPOINT :
❏ Set the waypoint sequencing field to the ‘hold’ setting by
highlighting the waypoint sequencing field and rotating
K one stop in either direction.
❏ To enter a desired course to or from the destination waypoint,
highlight the ‘crs’ field and use
K and O to enter the
desired course.
❏ Press E when finished.
DIRECT
-TO Waypoint sequencing field set to AUTO.
Waypoint sequencing field set to HOLD.
WAYPOINT SEQUENCING AND HOLD MODE
250 Quick Ref 7/14/98 9:14 AM Page 13