Garmin GNC 250 - Manual (Page 20)

ROUTES
TO ACTIVATE A ROUTE :
❏ Press R and rotate O to display the route catalog page.
❏ Rotate
K
to display the desired route.
❏ Press C twice to activate the cursor in the GPS window.
❏ Rotate K to select the ‘activate?’ option from the route action field.
❏ Press
E
. The route will be copied into route 0 (the active route).
TO DELETE / STOP NAVIGATING A ROUTE :
❏ Follow the first three steps described above.
❏ Rotate
K
to select the ‘delete?’ option and press
E
.
TO REVIEW ROUTE WAYPOINTS FROM THE
ACTIVE ROUTE PAGE
:
❏ With the cursor off, rotate K in the direction of the arrow prompts.
❏ To manually select your next route waypoint, highlight the desired way-
point with the flashing cursor and press
D , followed by E . The
GNC 250 will provide direct navigation guidance to the selected way-
point and resume navigating the remainder of the route in sequence.
TO HOLD ON A ROUTE WAYPOINT :
❏ Highlight the route waypoint you want to hold on and press D .
❏ Rotate
O
to highlight the waypoint sequencing field and use
K
to
select the ‘hold’ setting. Press E to accept.
❏ Use K and O to enter the desired course. Press E to confirm.
❏ Press
E
to confirm the ‘ok?’ prompt. The CDI page will display the
course at the bottom left of the page.
ACTIVATING AND DELETING ROUTES FLYING THE ACTIVE ROUTE
250 Quick Ref 7/14/98 9:14 AM Page 20