Direct -t o – Garmin GNC 250 User Manual
Page 14
Advertising
Once the waypoint sequencing field is set to the ‘hold’ position,
the selected course will appear at the bottom left corner of the CDI page.
TO ENTER A NEW COURSE FROM THE CDI PAGE
:
❏
Press
C
twice to activate the cursor in the GPS window.
❏
Rotate
O
to highlight the course select field.
❏
Use
K
and
O
to enter the desired course.
❏
Press
E
to confirm, and
C
to remove the cursor.
❏
To establish a new GPS calculated course, press
D
, then
E
. Press
E
again to confirm the ‘ok?’ prompt.
DIRECT
-T
O
USING THE COURSE SELECT FUNCTION
250 Quick Ref 7/14/98 9:14 AM Page 14
Advertising