Garmin GPS III Plus - Manual (Page 60)

Waypoints can be deleted
individually, by common
symbol or all at once. Select
the desired ‘Delete’ option and
press ENTER.
To rename a waypoint, enter
the new name directly over
the old name and press
ENTER.
Spell ‘n Find— allows you to display the Waypoint Edit Page for any waypoint in
memory, by typing in the first few characters of the waypoint’s name.
To Spell ‘n Find a waypoint:
1. Select the Spell ‘n Find option and use the rocker keypad to enter the first few
characters of the waypoint name.
2. Press ENTER to view waypoints starting with characters entered.
Delete Waypoint— allows you to delete the waypoint which is highlighted on
the Waypoint List.
Delete by Symbol— allows you to select a waypoint symbol and all waypoints
with this corresponding symbol will be deleted from memory.
Delete All— deletes all waypoints currently stored in memory.
To delete a waypoint (or waypoints):
1. Select the desired delete option from the list above and press ENTER. The GPS III+ will
delete all waypoints not used in a route, then prompt you to continue before deleting
any route waypoints.
2. If ‘Delete by Symbol’ is selected, select the desired symbol and press ENTER.
Editing Waypoints
Once you have created and stored a waypoint, it may be modified, reviewed,
renamed or deleted at any time through the Waypoint Edit Page. The Waypoint Edit
Page for any stored waypoint can be retrieved by highlighting the desired waypoint on
the map display, or selecting it from any waypoint list, and pressing the ENTER key.
To access the Waypoint Edit Page:
1. Use the rocker keypad to highlight the desired waypoint on the map display or on any
waypoint list.
2. Press ENTER to display the Waypoint Edit Page for the selected waypoint.
50
REFERENCE
Editing Waypoints