Garmin GPS III Plus - Manual (Page 81)

To clear the reference field
(and use your present position
instead) press LEFT side of
the ROCKER KEYPAD until
the reference waypoint field
becomes blank, then press
ENTER.
City Spell ‘n Find Options (cont.)
To select between size information and a reference waypoint field:
1. Select ‘Show City Size’ or ‘Show Reference’ (as appropriate) and press ENTER. (When one of the
options is selected, the other option will appear on the City Spell ‘n Find Options menu.)
2. If ‘Show Reference’ is selected, the City Spell ‘n Find Page will reappear.
To enter a reference waypoint and display the bearing and distance from the
waypoint to the selected city:
1. Select the ‘Show Reference’ option, as described above.
2. With the cursor highlighting the reference waypoint field, press ENTER to begin entering the
reference waypoint name.
3. Use the ROCKER KEYPAD to enter the name of the reference waypoint and press ENTER when
finished. The bearing and distance from the reference waypoint to the city location will appear at
the bottom right corner of the screen.
‘Show Reference’ allows you
to display bearing and dis-
tance (from any waypoint you
have stored in memory) to the
selected city.
71
REFERENCE
Main Menu
Nearest— displays up to nine nearest waypoints and 50 nearest cities within
200 miles of your present position, along with 50 exits on the nearest interstate
highway. See page 53.
Routes— allows you to create, edit, activate or delete routes. See pages 60-64.
Track Log— lets you specify whether or not to record a track log (an electronic
‘breadcrumb trail’ recording of your path), define how it is recorded or save track
log data for future use. The Track Logs Page also provides an indicator of the mem-
ory used for the active track log and options to clear the track memory or start a
TracBack route. See pages 58-59 for TracBack information.
The Track Logs Page is divided in two main sections: one for the active log (the log
currently being recorded) and available memory, and the second section showing
any saved track logs and the total number saved. The active log stores up to 1900
track log positions, based upon the criteria specified in the Track Log Options. Up to
10 additional track logs may be saved in memory, with up to 250 track log positions
in each saved log. You may also choose to display/not display the saved log.