Garmin GPS III Plus - Manual (Page 72)

The GPS III+’s Route List displays all the routes currently stored in memory,
along with a descriptive name for each route. Once a route has been created, it can
be activated and used for navigation from the Route List. A route may be followed
in the same sequence as it was originally created, or you can invert the route and
navigate from the end waypoint back to the beginning waypoint.
To activate a route:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route List is displayed, showing all routes
stored in memory.
3. Highlight the desired route and press MENU to display the Route Options.
4. Highlight ‘Activate’ and press ENTER to navigate the route in sequence.
To deactivate the route and stop using it for navigation:
1. Press PAGE repeatedly to display the Active Route Page. (See page 66.)
2. Press MENU to display the Active Route Options.
3. Highlight ‘Deactivate’ and press ENTER to stop navigating the currently selected route.
The Route List also allows you to enter your own 13-character name for any listed
route. By default the name includes the first and last waypoints in the route.
To enter a custom route name:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route List is displayed, showing all routes
stored in memory.
The Route List shows all
routes currently stored in
memory. Highlight the desired
route and press ENTER to see
the Route Plan Page.
Activating a route tells the
GPS III+ you wish to use this
route for navigation guidance.
62
REFERENCE
Route List