Garmin GPS III Plus - Manual (Page 86)

Simulator Settings
Mode lets you turn the built-in simulator on or off.
To enable/disable the built-in simulator:
1. Highlight the ‘Mode’ field and press ENTER.
2. Select ‘Simulator Off’ or ‘Simulator On’ (as desired) and press ENTER.
Speed lets you select a simulated speed when the simulator is enabled.
Track Control allows the built-in simulator to automatically align track heading to the
desired course (when using a GOTO or route), or allows you to manually adjust the
track heading, as desired.
Track allows you to manually enter a track heading. This setting is only available when
Track Control is set to ‘User Track’.
Altitude allows you to specify a user-defined altitude for your simulated position.
To select a simulator setting:
1. For track control, highlight the ‘Track Control’ field and press ENTER. Select ‘Auto Track’ or
‘User Track’ and press ENTER.
2. For simulated speed, user track, or altitude, highlight the desired field and press ENTER. Enter
the desired value using the rocker keypad and press ENTER when finished.
‘Simulator’ allows you to
configure the built-in
simulator feature.
The ‘Track Control’ setting
allows the simulator to
automatically “line up” on
the correct bearing to a
destination waypoint.
76
REFERENCE
Setup Menu: Simulator