Garmin GPS 92 - Manual (Page 16)

Simulator Mode
To continue the Takeoff Tour, you’ll need to put the
GPS 92 in simulator mode:
1. Press
P
repeatedly until the main menu page
appears.
2. Use the up or down arrow keys to move the field high-
light to the ‘Setup Menu’ option and press
E
.
3. Highlight the ‘Operation’ field and press
E
.
4. Highlight the ‘Current Mode’ field and press
E
.
5. Use the arrow keys to toggle through the options until
you reach ‘Simulator’ and press
E
.
The field highlight will move to the initial position
field, where you can enter the starting position of our
simulated flight, Lockhart Municipal Airport (50R, the
ICAO identifier), in Lockhart, Texas. Let’s see how the
data entry process works on the GPS 92:
1. Press
E
to begin data entry. Notice that the high-
lighted area changes from the entire line to a single
character.
Status Page
Map Page
Menu Page Position Page
The ‘Operation’ mode page
allows you to enable the
built-in simulator and
select a starting position
for a simulated trip.
Page Sequence
Takeoff
Tour
10
P
Navigation Page
Q
Start from the main menu
page’s ‘Setup Menu’ option
to select simulator mode.
92 manual 4/15/98 3:48 PM Page 10