Garmin GPS 92 - Manual (Page 21)

To view the airport communication page for ‘KAUS’:
1. Use the left arrow key to highlight ‘COMM?’ and press
E
.
All of the available frequencies for the selected airport
will be displayed, with the designation shown at the left
of each frequency. If there are more than seven frequen-
cies for a selected airport, use the up and/or down arrow
keys to view additional frequencies.
To view the runway information page:
1. Press
E
(repeatedly, if necessary) until the runway
information page is selected.
The runway information page features a diagram of
the available runways, along with runway length, surface
type and lighting for each runway.
To return to the moving map page:
1. Move the field highlight to the ‘DONE?’ prompt and press
E
.
Once you’re back on the moving map page, you’ll
notice that our plane is getting close to the special use air-
space (SUA) surrounding ‘KAUS’.
Whenever you are within 2 nm of an SUA, projected
to enter an SUA or inside an SUA, the GPS 92 will notify
you with a message and supply detailed information on
each SUA you are being alerted to. By looking closely at
the map display, you’ll notice that we will come very close
to the KAUS SUA, but not actually enter it. Once our
flight takes us within 2 nm of the SUA, we’ll be alerted
with a ‘Near SUA < 2nm’ message (you may have to wait
a minute or two to get the message, depending on how
fast you’ve made your way through the tour).
To view the SUA message:
1. Press
P
.
To return to the map page, press
P
again.
The GPS 92’s sectorized
airspace boundaries let you
watch your proximity to
each boundary on the
moving map.
Airport Pages
& SUAs
Takeoff
Tour
15
92 manual 4/15/98 3:48 PM Page 15