Garmin GPS 92 - Manual (Page 39)

Route Definition Page
The GPS 92 lets you create and store up to 20 routes
of 30 waypoints each. Routes are created, copied and
edited through the route definition page, which is
accessed through the main menu page.
To select the route definition page:
1. Press
P
until the main menu page appears.
2. Use the arrow keypad to highlight the ‘Routes’ option.
3. Press
E
to display the routes page.
4. To return to the main menu page, press
Q
.
The route number field is displayed at the top of the
page, with a 16-character comment field below. If no user
comment is entered, the field will display the first and last
waypoint in the route. The waypoint list accepts up to 30
waypoints for each route, with fields for desired track and
distance between legs. (If the leg distance exceeds 999
nm, the field will remain blank.)
Below the waypoint list are the route page function
fields which let you copy, clear, invert or activate the dis-
played route. Routes 1-19 are used as storage routes, with
route 0 always serving as the active route you are navi-
gating. If you want to save a route currently in route 0, be
sure to copy it to another open route, as it will be over-
written by the next route activation.
Route Comment
Field
Route Number
Route
Waypoints
Distance for
each Route Leg
Desired Track for
each Route Leg
Total Route
Distance
Route Function
Fields
‘ COPY TO’ field
A route may also be created
using the GPS 92’s
AutoStore function. Simply
enter a route number in the
route field before saving the
waypoint.
Note: If you enter the num-
ber of an existing route, the
waypoint you are adding
will be added to the end of
that route. It will not
be geographically placed
between the beginning and
end of the route.
Route Pages
Reference
33
92 manual 4/15/98 3:48 PM Page 33