Garmin iQue 3600a - Manual (Page 25)

Introduction: Customizing Your Handheld
1.15 Chapter 1 Introduction
Setting the Sounds and Volumes
You can control the sound for system alerts, alarms, and games using the General Preferences screen. You can also turn the alarm
vibrate and alarm LED on and off.
To set alarm and sound volume levels:
1. Tap the Home icon . Then tap the Prefs icon.
2. Tap the pick list in the upper right corner and choose General.
3. To set sounds and volumes, tap the System , Alarm , or Game Sound pick list and select a sound level.
NOTE: Turning off the System Sound also turns off the chime tones used during HotSync ® operations. The Game Sound
setting typically works only with newer games that are programmed to respond to it.
Enabling the Alarm Vibrate and Alarm LED
When you enable the Alarm Vibrate and Alarm LED settings, your handheld vibrates, and the LED blinks to notify you of alarms.
These settings are useful when you want the Alarm Sound off, but you still want to be notified of alarms.
To enable the Alarm Vibrate and Alarm LED:
1. Tap the Home icon . Then tap the Prefs icon.
2. Tap the pick list in the upper right corner and choose General.
3. Tap the Alarm Vibrate pick list and select On or Off.
4. Tap the Alarm LED pick list and select On or Off.
Turning Beam Receive On and Off
Beaming is discussed in Chapter 8 . For information on changing the Beam Receive preferences, see “Turning off Beaming” in that
chapter.
Selecting a Color Theme
You can customize the appearance of your color display by selecting one of more than 30 available color themes. You can also
choose to automatically switch between a day color theme and a night color theme by checking the Auto-Night box.
To select a color theme:
1. Tap the Home icon . Then tap the Prefs icon.
2. Tap the pick list in the upper right corner and choose General.
3. Tap the Colors pick list. Tap the scroll arrows to view all menu items.
4. Tap a color theme. Experiment with other color themes by repeating the
steps above. Tap the box next to Auto-Night to automatically switch to the
Night color theme after sunset.