Garmin iQue 3600a - Manual (Page 91)

7.1
Using an Expansion Card: Displaying Contents of a Card
Chapter 7 Using an Expansion Card
C
HAPTER
7: U
SING AN
E
XPANSION
C
ARD
The iQue 3600a allows you to insert an SD (Secure Digital) expansion card (not included). You can insert and remove a card at any
time without a reset. An expansion card allows you to back up data, increase memory size, or add games, reference materials or
other additional software or files to your handheld.
To insert an SD card in the iQue:
With the label facing the front of the unit, insert the card down into the card slot (as shown in the illustration above)
until it clicks into place. The iQue automatically displays the contents of the card.
To remove an SD card from the iQue:
1. Make sure the iQue is not reading or writing data on the card.
2. Gently push the SD card down into the slot, then release it so the card pops partially out of the slot.
3. Pull the card out of the iQue.
Displaying Contents of a Card
When you insert an expansion card, your handheld creates a new Applications Launcher category and displays in the category
all applications listed in the card’s launcher directory. The new category for the expansion card is named after the expansion card
volume; for example, the name “Card” is used throughout this section.
To display the contents of your card:
1. Tap the Applications Launcher icon on the front of your iQue until the “Card” category is displayed,
OR
Tap the
Applications category pick list in the upper right corner of the screen, then tap Card. The expansion card
contents are displayed on the Applications menu.
2. To display any additional applications, tap the scroll bar.