Garmin iQue 3600a - Manual (Page 98)

Chapter 8 Beaming Information 8.2
Beaming Information: Beaming an Application
Beaming an Application
To beam an application:
1. Tap the Home icon . Then tap the Menu icon .
2. Tap the App menu and select Beam.
3. Tap the application you want to transfer and tap Beam.
NOTE: Some applications are copy-protected and cannot be beamed, as indicated by a lock icon.
4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving handheld.
Receiving Beamed Information
To receive beamed information:
1. Turn on your handheld.
2. Point the IR port directly at the IR port of the transmitting handheld to open the Beam Status dialog box.
3. Tap
Yes to receive beamed information.
4. Wait for the Beam Status dialog box to indicate that the transfer is complete, and then tap OK to display the new
entry.
Incoming records are placed in the Unfiled category.
Turning Off Beaming
To turn beam receiving on or off:
1. Tap the Home icon . Then tap Prefs .
4. Tap the pick list in the upper right corner and select General.
5. In the General Preferences screen, tap the Beam Receive pick list, and then tap On or Off.