Bosch GSB 19-2 RE Professional - Manual (Page 13)

English | 13
Bosch Power Tools 1 619 929 J12 | (27.4.11)
f Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
f When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 “Drilling/Impact Drilling” selector switch
3 Rotational direction switch
4 Lock-on button for On/Off switch
5 Thumbwheel for speed preselection
6 On/Off switch
7 Gear selector
8 Auxiliary handle (insulated gripping surface)*
9 Depth stop*
10 Handle (insulated gripping surface)
11 Front sleeve*
12 Rear sleeve*
13 Chuck key*
14 Key type drill chuck*
15 Screwdriver bit*
16 Universal bit holder*
17 Allen key *
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Impact Drill GSB 19-2 RE
Professional
GSB 19-2 RE
Professional
GSB 780
Professional
Article number 3 601 A7B 5.. 3 601 A7B 6.. 3 601 A7B 1..
Rated power input W 850 850 780
Output power W 430 430 390
No-load speed
– 1st gear
– 2nd gear
min -1
min -1
0 – 1000
0 – 3000
0 – 1000
0 – 3000
0 – 1000
0 – 3000
Rated speed
– 1st gear
– 2nd gear
min -1
min -1
800
2060
800
2060
850
2170
Impact frequency at no-load min -1 51000 51000 51000
Rated torque (1st/2nd gear) Nm 5.2/2.0 5.2/2.0 4.1/1.6
Speed preselection z z z
Right/left rotation z z z
Key type drill chuck – z –
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-824-004.book Page 13 Wednesday, April 27, 2011 10:54 AM