Bosch Keo - Manual (Page 11)

English | 11
Bosch Power Tools F 016 L70 773 | (23.1.12)
Service
f Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Sabre Saws
f Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring. Cutting accessory contacting
a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
f Do not use the tool with the hook without rubber covers
or with damaged rubber covers. If the rubber covers on
the hook are damaged, replace the hook by a new one.
f Keep hands away from the sawing range. Do not reach
under the workpiece. Contact with the saw blade can lead
to injuries.
f Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback when
the cutting tool jams in the workpiece.
f When sawing without the hook, the guideplate must al-
ways face against the workpiece. The saw blade can be-
come wedged and lead to loss of control over the power
tool.
f When the cut is completed, switch off the machine and
then pull the saw blade out of the cut only after it has
come to a standstill. In this manner you can avoid kick-
back and can place down the machine securely.
f Use only undamaged saw blades that are in perfect con-
dition. Bent or dull saw blades can break, negatively influ-
ence the cut, or lead to kickback.
f Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
f Clamp material well. Do not support the workpiece
with your hand or foot. Do not touch objects or the floor
with the the saw running. Danger of kickback.
f Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
f Before any work on the machine (e. g. maintenance,
changing the tool, etc.) as well as during its transport
and storage, lock the On/Off switch in the off position.
There is danger of injury when the On/Off switch is unin-
tentionally actuated.
Protect the power tool against heat, e. g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
f In case of damage and improper use of the battery, va-
pours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Safety Warnings for Battery Chargers
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric
shock.
f Only charge Bosch lithium ion batteries or batteries in-
stalled in Bosch products with the voltages listed in the
technical data. Otherwise there is danger of fire and ex-
plosion.
f Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
f Before each use, check the battery charger. If damage
is detected, battery charger should be changed to new
one. Never open the battery charger yourself. Have re-
pairs performed only by a qualified technician and only
using original spare parts. Damaged battery chargers,
cables and plugs increase the risk of an electric shock.
f Supervise children. This will ensure that children do not
play with the charger.
f Children or persons that owing to their physical, senso-
ry or mental limitations or to their lack of experience or
knowledge, are not capable of securely operating the
charger, may only use this charger under supervision
or after having been instructed by a responsible per-
son. Otherwise, there is danger of operating errors and in-
juries.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Wear eye protection.
Only use the battery charger indoors.
OBJ_BUCH-1453-003.book Page 11 Monday, January 23, 2012 11:09 AM