Dell UPS 4200R - Manual (Page 24)

22 |
Installation and Startup
Completing the Startup
1 Verify that the Normal icon appears on the UPS status summary screen, indicating that the
UPS is operating normally and any loads are powered.
2 On the UPS status summary screen, press the button to check for active alarms or notices.
Resolve any active alarms before continuing. See “Troubleshooting” in the Dell Network
Management Card User's Guide.
If there are no active alarms, a “No Active Alarms” message appears.
3 To change other factory-set defaults, see “Operation” in the Dell Network Management Card
User's Guide.