Blue Ox BX4330 User Manual
Page 5
BX4330
Acclaim
®
Tow Bar
Operation Manual & Installation Instructions
292-2205 Rev J
Page 5 of 7
4/23/13
Unhooking / Tow Bar Storage Position
Figure 1
Figure 2
Figure 3
1. Park the towing vehicle with vehicle in tow,
in a straight line, on a flat, level surface to insure
minimum pressure is exerted on the tow bar legs. This will aid in the removal of the 1/2” pins.
Engage the towing vehicle parking brake. Place the towed vehicle either in park for automatic
transmissions or securely in first gear for manual transmissions. Unhook the lighting and safety
cables.
2. Disengage the leg latches by pushing down on the locking handles. Uncouple the tow bar from
the receiver ball. On the driver side, remove the quick pin and 1/2” pin attaching the triple lug to
the attachment tab. You may need to tap the 1/2” pin out if there is still pressure on it. Rotate the
driver side leg over onto the passenger side leg (Figure 1).
3. Align the driver side triple lug onto the holding pin of the passenger side leg. Secure the lug to the
pin with the provided hair pin clip (Figure 2).
4. Swing the coupler head towards the driver side attachment tab of the baseplate (Figure 3).
5. Attach the coupler head bracket to the baseplate attachment tab with the 1/2” pin and quick pin
(Figure 4).
Figure 4
Note: The Acclaim
®
will only store on baseplates with tab widths of 23” to 30”