AASTRA 6731i Installation Guide EN - Manual (Page 22)

Troubleshooting Solutions
41-001266-06 REV00 – 07.2011
19
Troubleshooting Solutions
Why is the light not coming on with a new Voice Mail Message?
Your phone system or service provider must provide “Visual” Message Waiting service for this function to work. Check
with your system administrator for more information.
Why is my handset not working?
Check to ensure that the handset cord is fully connected to both the phone and handset. See the section “Connecting a
Handset” on page 10 for information.
Why is my display blank?
Ensure that power is being provided to your phone. If your Network does not provide Inline power over Ethernet, you can
obtain an additional accessory, the a PoE inline power injector, to provide power over Ethernet locally to your phone.
See the section
“Connecting to the Network and to Power” on page 8 for details.
Why can I only see one option when the installation guide or user guide says there are more?
The telephone screen will only show one option at a time. To see more, press the down arrow button 2 .
Why does the telephone wobble?
Make sure the cords are routed properly through the back of the phone, as indicated in the section, “Connecting a Hand-
set” on page 10 . Check that the leg stands have been properly snapped into place. Since the legs can be oriented in two
different ways and in two different positions to offer four different phone viewing angles, check that both legs are oriented
in the same direction and in the same position on either side of the phone.
What is a programmable key?
There are 8 top hard keys (programmable up to 8 functions), located at the top of the front panel. These are keys that you
can set to perform specific functions and access enhanced services provided by third parties (for example, XML applica-
tions). See the section
“Line/Call Appearance Keys” on page 18 or refer to your Aastra Model 6731i IP Phone User Guide
for more information.