AASTRA 6731i Installation Guide EN - Manual (Page 4)

41-001266-06 REV00 – 07.2011
1
Welcome
Congratulations on your purchase of the Model 6731i IP Phone! The 6731i communicates over an IP Network,
allowing you to receive and place calls in the same manner as a regular business telephone. The 6731i IP Phone is
capable of supporting the SIP protocol.
Phone Features
• 3-line LCD screen
• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer
• 8 programmable top keys (4 Pre-configured functions: Save, Delete, Directory , Services)
• Press-and-hold speeddial key configuration feature
• Supports up to 6 call lines with LEDs
• Full-duplex speakerphone for handsfree calls
• Headset mode suppot (via handset jack)
• AC power adapter (sold separately)
• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependant on your phone system or service provider.
Requirements
• SIP-based IP PBX system or network installed and running with a SIP account created for the 6731i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or
Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance).
• Power source
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
– For power, use the Ethernet cable (supplied) to connect from thephone directly to the network for power. (No 48v AC
power adapter required if using Power-over-Ethernet.)
For Ethernet networks that DO NOT supply power to the phone:
– For power, use the 48V AC Power Adapter (limited power source (LPS) power supply, Input rated 100-240Vac. 50-
60Hz, 0.6A. Output rated 48Vdc, 0.31A min, included only in specific Aastra ordering SKUs) to connect from the DC
power port on the phone to a power source.
or
– (optional) - For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is availa-
ble as an optional accessory from Aastra Telecom. Contact your Administrator for more information.