AASTRA 6730i Installation Guide EN - Manual (Page 14)

Installation and Setup
41-001277-06 Rev 00 – 07.2011
11
Inserting the Key Card
This card contains the label identification spaces for 8 programmable keys.
1. Remove the logo plate from the top front panel of the telephone by gently pressing down and sliding upward.
2. Slide the card into the programmable key card slot on the top front panel of the telephone using the display slots for
alignment. Ensure the tabs are sticking out for future removal of the card.
3. Gently slide the logo plate back in place, covering the paper tabs.
6730 i
Logo Plate
Key Card
Display Slots