Using a headset, Advanced volume controls for the headset mic, To change the volume – AASTRA 6730i (Version 2.5 Text Keypad) User Guide EN User Manual

Page 111: Making calls

Advertising
background image

Model 6730i IP Phone User Guide

103

Making Calls

If you are in Speaker audio mode, lift the handset and press

to switch between

handsfree and handset.

If you are in Speaker/headset audio mode, press

to switch between handsfree and

headset.

When the handset is on hook, press

to disconnect the call.

When handsfree is on, the speaker light turns on.

Using a Headset

The 6730i accepts headsets through the modular RJ9 handset jack on the back of the phone.

Contact your telephone equipment retailer or distributor to purchase a compatible headset.

Advanced Volume Controls for the Headset Mic

On the 6730i, there are 3 options for the headset microphone volume. For more information about

the headset microphone, see

“Headset Mic Volume”

on

page 28

.

To change the volume:

1. Press

to enter the Options list.

2. Select Preferences and press

4.

3. Use

2 to scroll down to Set Audio and press 4 to select.

4. Press

2 to scroll down to Headset/Mic Volume and press 4 to select.

5. Use

2 to scroll down the list and press 4 to select your desired volume.

6. Press

4 to save changes and 3 to exit.

7. If you do not wish to save changes, press

3 to return to the previous screen.

Note:

The 6730i supports handsets or headsets using the same jack. Both a

handset and a headset cannot be connected at the same time.

Note:

Customers should read and observe all safety recommendations contained

in headset operating guides when using any headset.

IP Phone UI

Note:

By default, the volume for the headset microphone is set to medium.

Spea

eaker

er

Spea

eaker

er

Goodbye

Goodbye

Options

Options

Advertising