AASTRA 6751i User Guide EN - Manual (Page 88)

80 Model 6751i IP Phone User Guide
Managing Calls
CFWD Account-Based Configuration
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another
destination.
You can set CFWD on the phone-side by configuring the account information via the Aastra
Web UI at the path Basic Settings->Account Configuration. When configuring CFWD, you can
specify one, all , or a combination of call forward states (All, Busy, No Answer) for your phone.
You can also specify the CFWD number(s) to use when your phone is in a specific state. When
your phone is in a specific state(s), all incoming calls get forwarded to the number you specify.
The following table describes the Message Waiting Indicator (MWI) LEDs when you enable
CFWD on the IP Phone.
You can also enable and disable CFWD on the phone using the IP Phone UI. In the IP Phone UI,
you set CFWD at the path Services->Option List->Call Forward.
Configuring CFWD Using the Aastra Web UI
Use the following procedure to configure CFWD using the Aastra Web UI.
1. Click on Basic Settings->Account Configuration.
2. In the "Call Forward State" field, enable a state (All, Busy, and/or No Answer) on the
phone by checking the box. Disable CFWD state(s) by unchecking the box(es).
3. In the "Number" field for each state that you enable, enter a phone number for the phone to
use to call forward any incoming calls when your phone is in that state.
MWI LED Behavior
for All Modes
MWI LED ON if phone has CFWD enabled.
MWI LED OFF if phone has CFWD disabled.
Aastra Web UI