AASTRA DT292 for MX-ONE User Guide EN - Manual (Page 37)

37 DT292
Outgoing Calls
Example: To call Bob.
(Anita, Bill and Bob are programmed in the Phone book).
2
Press and keep pressed.
Anita is shown in the display. 2
Press again, shortly.
Bill is shown in the display. M
Press.
Bob is shown in the display. Ь Ы
Press to call Bob.
Programming a number or function on the R/Message
key
You can program a number that you call very often or program a
function (depending on system).
Route: Settings » MessageKey » Mess.KeyNo Z
Enter the number.
Ь Ы
Press.
Note: Only one number or function can be programmed. If
you change it, the default function to enter your mailbox
directly will not work any more. If you want to use the
Message Waiting function (default) again, the number to
enter the mailbox has to be re-entered.