AASTRA 620d for Aastra 400 Quick User Guide - Manual (Page 5)

General Characteristics
• Headset connection via a cable or Bluetooth®
• Mini USB connection
• Protection class IP 50
• Power battery (optional)
Installation
Installing the battery
Push the battery cover downwards until it is re-
leased from the lock, then take it off. Insert the
battery with the contacts downwards. Replace
the battery cover and push it upwards until it
locks.
Connection
• Taking a call: Press the Call key.
• To end the connection: Press the End key.
• To make a call from lists (redial list, call lists,
phone book): Call up depends on the commu-
nication system, select an entry, then press the
Call key.
Phone book/Name selection
➀/➁/➂/➄: Press the navigation key upwards or
downwards. Enter name or first letter of the
name. If necessary select entry. To dial: Press the
Call key.
➃: Press each of the corresponding keys once for
the first few letters of the name you are looking
for. Separate the first name and the surname
with the #-key, e.g. "no s" (6 6 # 7) for Nobel
Stephen. Press the
ABC softkey. Press the Call
key; the selected entry is called.
During a connection...
Enquiry
➀/➁/➄: Enter R and call number.
➂: Enter R and call number then press hash.
➃: Press the Enquiry softkey or Call key then en-
ter the call number.
To end the enquiry call
➀: Enter R and 1 [ ].
➁/➂: Press >>>, select
Release call and confirm
with Ok , press R.
➃/➄: Press the
End call softkey.
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
➀: Enter R and 2 [ ].
➁/➂/➄: Press R.
➃/➄: Press the
Brokering softkey.
To set up a conference
Connects several callers for a conference call. A
call participant is put on hold (see "Enquiry"):
➀/➄: Enter R and 3 [ ].
➁ : Press >>>, select
3 party and confirm with Ok .
➃: Press the Conference softkey.
Leaving a conference call: Press the End key.
To set up a connection
➀/➁/➂/➄: Press R, enter call number and press
End key.
➃: Press the
Enquiry softkey, enter call number
and press the Connect softkey.
To take a call during a conversation (Call wait-
ing)
➀: Enter R and Star 10 [ ].
➁/➂: Press R.
➃: Press the Call waiting softkey.
Callback
The person is busy or does not answer.
➀: Enter R and 5 [ ].
➁: Press >>>, select Callback and confirm with
Ok .
➃: Press the
Callback softkey.
➄: Press 6 [ ].