AASTRA DT292 for MD Evolution User Guide EN User Manual
Page 124
Advertising
Installation
MD Evolution – Cordless DT292
124
Connect the adapter to the charger and connect it to the
mains outlet as shown in the figure below.
Notes:
Place the DT292 in the charger and charge it for at least 4
hours before using it the first time.
Make sure the local mains voltage corresponds to the
voltage on the charger.
Only use the charger that comes with the phone.
Do not connect the phone to the charger without a battery.
Place the phone in the charger to charge the battery.
Complete charging before you subscribe or use the phone. The
green light of the charger is turned off when charging is completed.
For more information about charging the battery, see section
Advertising