EVS XEDIO Manager Version 3.1 - January 2011 User Manual - Manual (Page 34)

Xedio Suite Version 3.1 - User Manual – Xedio Manager
EVS Broadcast Equipment – January 2011
Issue 3.1.C
25
5.3 SWITCHER MANAGER
When you click the Switcher Manager button, the Switcher Manager window is
displayed in the Work area.
You can indirectly control a switcher through the system. If the Transmit Switcher
Info field is checked, Xedio Ingest Server application transmits the switching
information over the Ethernet network to a dedicated software device before
starting any recording. This device will manage the audio and video routing at the
switcher with regard to its brand and protocol, and send an acknowledgement back
to Xedio Ingest Server within a determined delay in order to start the encoder(s).
To set switcher parameters, complete the following fields and then click on the
Apply button.
Field Description
Transmit Switcher
Info Enables/Disables the use of a software device to control
the switcher(s)
Switcher Config Host
IP IP address of the software device to access to.
Switcher Config Host
Port Port number where to send the switching information.
Wait For Host
Response TimeOut
(in sec.) Delay for the “acknowledge” coming from the device.
Note
When timeout delay is reached, Xedio Ingest
Server aborts the recording process.