2 system information, 3 osd settings, Genlock error msg – EVS XSense Version 10.04 - January 2011 Configuration Manual User Manual
Page 13: Disk error msg, 3 osd, Ystem information, Ettings
Issue
10.04.B
XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
4
immediately in the Remote Setup Menu, and vice-versa.
2.2.2 S
YSTEM INFORMATION
The Setup screen also provides information about:
•
actual and maximum number of local clips on the server: 5400 clips.
•
actual and maximum number of clips of the database for the entire network:
32000 clips.
•
network speed, network mode and network number as defined in the EVS
Configuration Menu
•
version of the Multicam software
•
codec and video configuration, and bitrate used.
2.2.3 OSD
S
ETTINGS
You can also define the OSD settings on page 1.1 or 5.1 of the setup menu on the
Remote Panel. You will find a description of these settings in the Multicam user
manual.
G
ENLOCK
E
RROR
M
SG
Possible values: Yes (default) / No
This function enables or disables the Genlock information on the output monitor. If
Genlock reference is not correct, the !GkV message appears on the output
monitor.
D
ISK
E
RROR
M
SG
Possible values: Yes (default) / No
This function displays an error message (!Raid) on the output monitor when a disk