16 grab image, 17 browse button, Xt[2] and xt[2 – EVS XSense Version 10.04 - January 2011 Configuration Manual User Manual
Page 65: 18 reset archive status, 16 g, 17 b, 18 r

Issue
10.04.B
XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
56
3.9.16 G
RAB
I
MAGE
Possible values: Disable (default) / Enable
When the function is enabled and a default XFile has been assigned, the grab
function is coupled with the Mark key on the Remote. Each time the Mark key is
used, a cue point is marked and a command is sent to the XFile to save that
image. The grab can also be activated on the keyboard with the combination CTRL
+ G.
3.9.17 B
ROWSE
B
UTTON
The presence of this parameter depends on the EVS video server used.
XS
The parameter is not available from the Setup.
XT[2] and XT[2]+
The parameter is available from the Setup.
Possible value: Browse.
In the default BROWSE mode, it will activate the Play-list Browse directly.
3.9.18 R
ESET
A
RCHIVE
S
TATUS
:
Pressing F6 will reset the archive status of all clips present on the system. A
confirmation is required. Refer to the description of the Archive function for
details.