EVS XSense Version 10.04 - January 2011 Configuration Manual - Manual (Page 28)

XSense – Version 10.04 – Configuration Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.B
19
2.6 GPI SETTINGS (PAGE 4)
On the fourth page of the Setup Configuration module (SHIFT-F2), it is possible to
define GPI settings:
2.6.1 GPI T
YPES
Three types of GPIs are available to be used on the servers:
• Relay GPIs, which are always GPIs OUT, numbered from 1 to 4.
• OPTO GPIs, which are always GPIs IN, numbered from 1 to 4.
• TTL GPIs, which are switchable from GPIs IN to GPIs OUT or vice versa.
By default, they are GPIs IN. If TTL GPIs are already assigned when you
switch their type, a warning message will be displayed.
2.6.2 GPI-R
ELATED
I
NFORMATION
The following information is defined for each individual GPI IN:
Setting Description
# GPI number
Channel/Device Server channel or external device that will send the GPI.
Port Port on which the server will receive the GPI.
Function Operation executed by the server when receiving the given
GPI IN. The following functions can be defined depending on
the protocols: