EVS IPDirector Version 4.3 - October 2007 Part 4 User's Manual - Manual (Page 15)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 4 – System Management & Troubleshooting
EVS Broadcast Equipment
1.2 VIDEO DISPLAY
1.2.1 I
NTRODUCTION
The Video Display allows the user to see a display of video in a
window on the VGA output of an IP Director Workstation.
Open the Video Display panel by selecting the Video Display
icon from the Application toolbar in the IP Director main window.
Before you can actually display a channel in the Video display,
you need to perform the following tasks:
• Make a physical connection from the required video source to
the input of the A/V board on the IP Director workstation.
For more information, refer to section 1.2.2 ‘Displaying Video
on the Video display Window’, on page 7.
• Assign a channel to the Video Display in the Remote Installer
application.
For more information, refer to section 1.2.3 ‘Assigning a
Channel to a Video Display’, on page 7.
• Select the A/V board in the Video Display to open the related
channel.
For more information, refer to section 1.2.4 ‘Selecting the
A/V Board in the Video Display’, on page 8.
6