EVS IPDirector Version 4.3 - October 2007 Part 4 User's Manual - Manual (Page 16)

IP Director Version 4.3 – User Manual – Part 4 – System Management & Troubleshooting
EVS Broadcast Equipment Issue 4.3.C
1.2.2 D
ISPLAYING
V
IDEO ON THE
V
IDEO DISPLAY
W
INDOW
To be able to display a channel in the Video Display window, a
physical connection must be made from the required video
source to the input of the IP Director workstation A/V board.
Note
To display video on the VGA uses around 25% of the
CPU power of the workstation for a display size of 384
x 288, more if a larger display is required. The
reactivity of the IP Director interface could be
significantly slower if larger window sizes are used.
1.2.3 A
SSIGNING A
C
HANNEL TO A
V
IDEO
D
ISPLAY
Once the physical connection is made, the Video Display panel
needs to be linked to the corresponding PGM video channel
connected to the input of the IP Director Workstation video card.
Using the Remote Installer tool, select the IP Director
workstation and right click on the IP Director box and select Edit
Config.
Note
For more information about the Remote Installer tool,
see the IP Director Technical Reference.
The IP Director Configuration window opens:
7