EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 185)

VarID Configuration File
The VarID parameters are defined in a configuration file. This file, named varid.ini, is
located in the C:\LSMCE\DATA directory.
The file has the following syntax:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; VARID settings
;------------------------------
;Parameter values and [default]
;
; Uniqueness= [Local] or Global
; Length= [32] or 8
; Format= [ASCII] or Binary
; Visibility= [], 1..29,*
; default= empty is converted to local XT Net
number
; * for all XNet
;
;------------------------------
Uniqueness=Local
Length=32
Format=ASCII
1=
2=
3=
4=
5=
6=
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Uniqueness
Description Specifies whether the VarID will be unique at the XNet network
level or at the EVS server level.
This parameter is valid with VDCP, AVSP and LinX protocols.
Values • Global, the VarID is unique at the XNet network level.
• Local, the VarID is unique at the EVS server level.
Default value Local
Length
Description Specifies whether the VarID has a fixed length of 8 bytes or a
variable length of 32 bytes.
Values • 8, fixed length.
• 32, variable length.
Default value 32
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration 177