EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 225)

Effect duration for take
Description Defines the duration of the transition when using the TAKE key
to chain 2 sequences in PGM+PRV mode.
Values Range of values: 00s00fr to 20s00fr.
Default value 00s05fr
Fast jog
Description Sets the increment of the jump when the Remote Panel is used
in Fast Jog mode.
Values The values from 1 to 20 times are possible.
Default value 20x
PGM Speed / var max
Context During playback, if PGM Speed or Var Max has been enabled
in the secondary menu of the Remote Panel, the lever range
will be adapted so that:
• the only playback value for any position of the lever other
than 0, is the one specified by this parameter in the setup
(PGM Spd mode ON)
OR
• the speed range defined by the lever is limited to the value
specified by this parameter (VarMax mode ON).
Description Specifies the playback speed assigned to the lever when the
PGM Speed or Var Max commands are used.
Values Range of values from 1 to 400 %
Default value 50%
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration 217